ASSORTED NECKLACE

What you need:

-2 chains of same colour but different thickness

-Pearls

-Either a pendant or brooch(i used a pendant)

-Thread

-A smooth strap

Steps:

1.Thread the pearls making sure the thread can hold them in place and leaving some extra thread on the ends.You can create a pattern for more detail like I did.

2.Measure the length of chains you need .The length of the thicker chain should be slightly longer than the threaded pearls while the smaller one should be shorter in length by more than a quarter of the measurements.You have the priviledge to make your chain long or short according to your preference but both ways are still good.

3.Now attach together the chains which when holding them up one will be hanging loosely.

4.Place the thread of pearls in between the chains and tie off the thread ends onto the chain ends.

5.Then fix your pendant or brooch  onto one of the ends of the chains...left or right.You could do this by sewing in on or clasping it in,find a way.

6.The last step is tieing on the straps on each end which makes the wearing of the necklace quite simple....Tie them up and leave....Have fun making!

HAPPY DIY-ing PEEPS!!!