ASSORTED NECKLACE
What you need:
-2 chains of same colour but
different thickness
-Pearls
-Either a pendant or brooch(i used a
pendant)
-Thread
-A smooth strap
Steps:
1.Thread
the pearls making sure the thread can hold them in place and leaving some extra
thread on the ends.You can create a pattern for more detail like I did.
2.Measure
the length of chains you need .The length of the thicker chain should be
slightly longer than the threaded pearls while the smaller one should be shorter
in length by more than a quarter of the measurements.You have the priviledge to
make your chain long or short according to your preference but both ways are
still good.
3.Now
attach together the chains which when holding them up one will be hanging loosely.
4.Place
the thread of pearls in between the chains and tie off the thread ends onto the
chain ends.
5.Then
fix your pendant or brooch onto one of
the ends of the chains...left or right.You could do this by sewing in on or
clasping it in,find a way.
6.The
last step is tieing on the straps on each end which makes the wearing of the
necklace quite simple....Tie them up and leave....Have fun making!
HAPPY
DIY-ing PEEPS!!!










